Waste Shredder
Microwave Bio Waste cum shredder
Microwave Sterilizer with an integrated Shredder, intended fo r treatment of Medical Waste in ho spitals and clinics.
The device shall not be used for disposal of Infectious chemical wastes that require special treatment, or ganic materials, Blood and blood products, unrecognizable human body parts and partials of organ s remaining after surgery and other kind of medical treatment, laboratory and pathology examination materials, and particles of those (unless local country regulations allow it )
waste treatment automaton and automated waste treatment process. waste treatment automaton, in particular to trivialize waste from care activities with infectious risks, as well as a waste treatment process using that automaton
automated waste treatment process, by means of an automaton as described above, and this automaton includes means for grinding waste of the type with a rotating blade, comprising the steps that consist of: a) introducing waste into the vat; b) crush the waste by rotating the blades at a given speed V1, and the crushing produces heat that heats the waste; c) emitting microwaves in the vat, mixing the residues by rotating the blade at a speed V3 below V1, to heat the residues and keep them at a disinfection temperature for a determined time; and d) evacuate waste from the waste.
Municipal waste Shredder
Shredder municipal solid waste shredder without classifier screen designed and built for the primary shredding of industrial waste and scraps in which product preparation is required that allows subsequent manual sorting or automatic selection. The special design of the shafts and cutting counter-blades combine to make the LC shredders extremely versatile and robust. These details help to operate LC shredder perfectly in particularly heavy and demanding circumstances.
Municipal solid waste shredder can be made with electric or hydraulic transmission system. The rotation of the shafts is programmed to allow the shafts to move independently and to vary the direction of rotation. Depending on input materials, LC industrial shredders are able to operate in various movement. LC shredders are managed by a user interface with PLC ,a remote control and remote assistance system.
Solid recovery fuel is a high-quality alternative to fossil fuels and are produced from commercial waste such as paper, cardboard, wood, textiles and plastics. Solid recovery fuel goes through an additional process of improving quality and value and due to their good calorific value they are used in cement kilns.
Solid recovery fuel is produced from domestic and industrial waste such as biodegradable materials and general waste which is non-hazardous. Non-combustible materials, such as glass and metals are removed, and the residual material is subsequently shredded. SRF is used to generate energy in recovery plants, many of them in Europe, where electricity, hot water and municipal heating are produced.
Extremely versatile, the double shaft shredder LC series is made in two different model and are ideal for the volume reduction of:
Shredder for Waste tyres shredding
Shredder for Industrial waste shredding
Shredder Medical waste shredding
Shredder Coolers and refrigerators shredding
Shredder Aluminum scrap shredding
Shredder Copper shredding
Shredder Metal scrap shredding
Shredder WEEE shredding
Shredder MSW shredding
Shredder Plastic waste shredding
Shredder Scrap wood shredding
SS 250
Power 45 kW
Dimensions 1730x1700x2000 mm
Weight 2000 kg
Rotor size 800 mm X 250 mm
Single Shaft Shredder
Industrial shredders fast of series are extremely versatile machines that allow to check the size of the material in output thanks to the presence of the sorting grid; however, can also operate without grating for roughing activities. Industrial shredder fast can therefore be used both as industrial primary fast shredder for the first reduction of material (reinforced copper and aluminum cables with the presence of ferrous parts, vehicle tires, scrap of electrical and electronic equipment, vehicle parts, etc.), or for further refining of materials already treated The transmission, thanks to a suitably sized flywheel, gives high torque and cutting capacity even of the most tenacious materials. The cutting chamber can be easily reached thanks to the hydraulic opening system (both of the loading hopper and of the grid support) for the adjustment of the blades and maintenance activities. The safety system protects the rotor from damage in case of overload. The robust construction, the overall weight of the machine and the use of high quality materials guarantee reliability, ease of use and low running and maintenance costs.
Fields of use of the shredder-refiner:
tyre recycling
recycling of materials deriving from the demolition of vehicles (dashboards of motor vehicles, wiring of vehicles, motor vehicle upholstery)
aluminium scrap recycling
waste treatment
recycling of electrical and electronic materials (WEEE)
electric cables – also of considerable diameter, armored cables, cables with the presence of ferrous parts
oil filters
refrigerators
industrial waste in general
SS 250
Power 45 kW
Dimensions 1730x1700x2000 mm
Weight 2000 kg
Rotor size 800 mm X 250 mm